Warning: got into it with a toolroom guy in Dayton about touching off on the part vs the fixture, where do you land | CNC Operators - The Design Community Hub
Warning: got into it with a toolroom guy in Dayton about touching off on the part vs the fixture, where do you land
Last Tuesday a guy who runs a VF-2 in Dayton got into it with me over how we set Z, and he made a point I keep chewing on. His claim was that touching off on the part itself is fast but bites you the second a vise jaw or a shim shifts, and he'd rather spend 90 extra seconds on the fixture every single setup. I've always done the part because it's quicker and it's how I learned at my first shop, but he's got 12 years on me and hasn't scrapped a setup in a while. So is the fixture the safer habit or just slower for no real gain? Curious what you all do on a part with a rough top face.