My old drafting teacher in Fort Wayne said never erase a mistake line, draw over it, and that tip saved my layout last month | Build And Design - The Design Community Hub
My old drafting teacher in Fort Wayne said never erase a mistake line, draw over it, and that tip saved my layout last month
I took drafting in high school back in 2003 and Mr. Halverson had this rule about construction lines: you never erase them, you just draw the good line darker on top. I thought it was just some old guy habit from the days before CAD, so I ignored it for like 20 years of doing layout work. Last month I was laying out a small kitchen reno in Fort Wayne and I kept erasing my guide lines to clean things up, then losing my reference points and re-measuring everything from scratch. Three times I did this before I remembered him standing over my table saying it. I started leaving every pencil line in place and just darkening the final cuts, and my layout time dropped from about 4 hours to 90 minutes. The crazy part is you can see the whole decision trail on the board, so when the homeowner asked why the sink moved 6 inches, I could point right at the line where I changed my mind. Do any of you keep your rough layout lines on the drawing, or does it drive you nuts to look at?