TIL a retired wire guy at the Tucson hangar was spot on about coax connector torque
About 4 months ago a retired avionics guy at our Tucson hangar chewed me out for cranking BNC connectors down by feel, saying they should be snug plus a quarter turn and no more. I figured he was just old school, then I found a cracked dielectric in a nav antenna fitting on a 172 during a routine check, exactly where I had over-tightened. So does anyone actually use a torque wrench on these little connectors, or am I the only one fighting the temptation to just give it one more turn?
A cracked dielectric from hand tightening? That is wild. I always figured snug was snug and that was the end of it, but clearly not. Makes me wonder how many of those little fittings are out there holding on by luck.